150 Appendices
List of Messages (continued)
The following messages may appear when the camera is connected to Bubble Jet
Printer with the direct print function.
The error number is displayed on the control panel of Bubble Jet Printer. Please
refer to the Bubble Jet Printer Quick Start Guide for the remedies corresponding
to the error numbers.
Printer in use: The printer is printing the data from the memory card
inserted in the computer or printer. The printer
automatically starts printing the images from the
camera after completing the current printing.
Printer warming up: Printer is warming up. When it is ready, the printer
starts printing automatically.
No printhead No print head is installed in the printer.
Printer cover open Close the printer cover securely.
Media type error Cancel printing. Set the paper you chose in the Print
Style.
Paper lever error Adjust the paper selection lever to the proper position.
Low ink level The ink tank needs to be replaced soon. Prepare a
new ink tank. If you select [Continue] in the error
screen, you can restart printing.
Waste tank full You can restart printing by pressing the RESUME/
CANCEL button on Bubble Jet Printer. Please request
replacement of the waste tank to the shop where you
purchased the printer or your nearest Canon customer
support center listed in the Bubble Jet Quick Start
Guide.
Printer error Turn off the printer, then turn it on again. If the error
persists, please consult your nearest Canon customer
support center listed in the Bubble Jet Quick Start
Guide.