Canon Printer manual Vacuum Strength Setting Strongest, Weak, Cut Speed Setting Standard, Fast

Media Configuration Tool Guide Chapter 4 Adding Media Types

Media Thickness	Setting
Standard	For media that is a standard thickness
	and has no problem printing.
Thin	Select this when the media set is thin, or
	when the image is adversely affected.

6.From the Vacuum Strength list set the Vacuum Strength when printing a media type to be added.

The following settings are available for Vacuum Strength.

Vacuum Strength	Setting
Strongest	For media that does not settle even
	when set to Strong.
Strong	For media that does not settle properly
	because it curls.
Standard	For media that has no problems when
	printed.
Weak	For thin media, or when the image on
	the media is adversely affected.

7.From the Skew Error Detection Standard Values list set the standard which will cause a media slant detection error in the printer.

The following settings are available for Skew Error Detection Standard Values.

Skew Error Detection	Setting
Standard Values
1 mm, 2 mm, 3 mm, 4 mm,	Reduce the value for media used for
5 mm	documents where the precision rate is
	important and for media where strict
	detection of slants is required. Increase
	the value for media that does not slant
	much and for media that is used for
	documents that allow for a degree of
	slant.

8.Set the auto cut speed for media to be added from the Cut Speed list. The following settings are available for Cut Speed.

Cut Speed	Setting
Standard	For media that has no problem with
	cutting.
Fast	For media that has problems, such as
	inaccurate cutting with the Standard
	setting.

9.Set the amount of media to purge after cutting the media type to be added in the Media Feed Amount After Cutting list.

The following setting are available for Media Feed Amount After Cutting.

Media Feed Amount After	Setting
Cutting
No	Does not purge media after cutting.

4-7