Canon Pro9500 Set Print Size function of Print Size, Print with Margins Margin Setting Method

Easy-PhotoPrint Pro

B/W Print with Margins

Margin Setting Method 2

Set Print Size function of [Print Size]

Margins can be set to any height and width of the photograph size to print. This setting fixes the photograph's vertical and horizontal ratios. Apply this feature when you want to maintain the original composition of your photograph.

[Example of application to A3 size paper (420 mm x 297 mm)]

1.Use Layout to select [Bordered (full)], then click on the [Specify Print Size] button to call up the setting screen.

Specify Print Size Button

Bordered (full)

2.To set the right and left margins on the short edges to 45 mm/1.77 inch, set the width to 330 mm (420 mm - 45 mm x 2). The photograph's vertical and horizontal ratios are fixed, so the ratio to the height is automatically maintained even when you only change the width direction. Note that margins can also be larger than 45 mm. The Preview screen allows you to check the final balance between the margin and photograph. This further aids in the degree of freedom and ease of use of this feature.

3.Click on [Center Image] to automatically move the image to the paper center. To increase the amount of margin at the bottom of the photograph to include the name of the photograph or the shooting information, simply reduce the [Top] value.

Layout when Center

Image is applied

Example of increasing the bottom margin to insert

shooting information

20