Trimming (Printing a Portion of an Image)

You can specify which portion for an image gets printed.

Prior to Trimming

Please set the Print Style (Image, Borders and Date) first before setting the trimming settings (p. 115).

1In Replaying mode, press and choose [Trimming] using C or D on the

multicontroller and press again.

•The trimming frame will appear at the center of the image. If a trimming setting has already been selected for the image, the frame will appear around the previously selected portion.

2 Trim the Image.

Changing the Size of the Trimming Frame

•Move the zoom lever toward or .

•The trimming frame can be changed to a minimum selection of approximately half the displayed image or a maximum selection that is virtually the same size as the image.

•You can cancel the trimming setting by moving the zoom lever toward again when the trimming frame is already set to the maximum size.

•If the image is magnified while in the trimming mode, it will print out more coarsely the greater the degree of magnification. The trimming frame will change to red.

Setting the Portion of the Trimming Frame

•Move the trimming frame using C, D, B or A on the multicontroller.

Rotating the Trimming Frame

•You can rotate the trimming frame by pressing

the button.

Printing with a Direct Print Compatible Printer (Optional) 117