Printing
An image can be printed when displayed in single replay or selected in index replay.
1Choose an image using B or A on the multicontroller and
press 
.
2Set the number of prints, the print style and cropping settings as required.
•Selecting the number of copies (p. 124)
•Setting the Print Style (p. 124)
•Trimming (Printing a Portion of an image) (p. 126)
3Choose [Print] using B or A on the
multicontroller and press 
.
•You can also select [Print] by pressing the 
button.
•The image starts printing and, when it is completely finished, the display reverts to standard replay mode.
• You cannot print movies or images recorded in the RAW format.
Cancel Printing
• To cancel printing between images, press 
. A confirmation dialog appears.
Select [OK] using B or A on the multicontroller and press 
.
The printing stops even if it is incomplete and the paper is fed through.
•A print in progress cannot be stopped. Wait until the current image is printed and then cancel before the next one starts. The display reverts to standard replay mode.
Printing Errors
•An error message will appear if an error occurs for some reason during the printing process (p. 150). The printing resumes automatically after you correct the
error. If the error persists, press 
and stop printing.
•The [Continue] and [Stop] options may appear with some error messages.
•The error number is displayed on the operation panel of Bubble Jet Printer. Please refer to the Bubble Jet Printer Quick Start Guide for the remedies corresponding to the error numbers.
Printing with the Direct Print Compatible Bubble Jet Printer (Optional) | 123 |