Canon S830D manual Unpack the Printer, Prepare the Printer, Install the Print Head, Start Here

1 Unpack the Printer

1Carefully remove all items from the box.

S830D

Photo Printer

Paper Rest

Output Tray

Documentation

and Software Kit

CompactFlash™ Card Adapter Direct Interface Cables

S830D Print Head Power Cord

Ink Tanks

BCI-6C Cyan	BCI-6M Magenta
BCI-6BK Black	BCI-6Y Yellow

BCI-6PC Photo Cyan BCI-6PM Photo Magenta

2 Prepare the Printer

1Remove the shipping tape from the front

and sides of the printer. Peel off the protective film from the LCD panel.

Protective Film

Shipping Tape

2Plug the power cord into the back of the printer and connect the other end to a power outlet.

3Press the POWER button.

POWER	POWER
Lamp	Button

4Open the front cover. The print head holder automatically moves to the center. Remove the protective tape.

Protective tape

Serial number

Write down the serial number located to the right of the print head. You will need this later to register the product.

Start Here

Easy Setup Instructions

3 Install the Print Head

1Remove the print head from its package.

2Turn the print head over, then remove the orange protective cap.

NOTE: Do not touch the electrical contacts.

Electrical contacts

3Raise the gray lock lever.

4Gently slide the print head into the holder. The print head will rest at a slight angle. Do not press it down.

5Lower the lock lever and gently press it down until it locks into place.

4 Install the Ink Tanks

1Pull the orange tab off the yellow ink tank (BCI-6Y), then remove and discard the plastic wrapper.

2Twist off and discard the orange protective cap.

Protective cap

NOTE: To avoid spilling ink, never press on the sides of an ink tank.

3Insert the ink tank into the correct slot. (Refer to the color guide on the print head.)

Press down gently until the ink tank locks into place.

4Insert the remaining five ink tanks into their assigned slots.

5Close the front cover and attach the paper rest and output tray.

S830D

Photo Printer

5 Connect the Printer To Your Computer

1Turn the printer off.

IMPORTANT: Be sure the printer is off before continuing, or the computer will attempt to install the printer driver before the printer is ready.

2Connect one end of the USB cable

to the computer, the other to the printer.

USB Port

USB Cable

Continue with Step 6 on side two.