Changing Shooting Functions

If you set the mode dial to G, you can change the settings in the 4 tab (p. 48).

Before attempting to shoot using a function explained in this chapter in modes other than G mode, check if the function is available in those modes (pp. 166 – 169).

Turning off the AF Assist Beam

The lamp will automatically light to assist focusing in low light conditions when you press the shutter button halfway. You can turn off the lamp.

●Choose [AF-assist Beam], then press the qr buttons to choose [Off].

Changing the Flash Timing

You can change the timing for the flash and shutter.

●hoose [Flash Settings] and press the m button.

●Press the op buttons or turn the Ê dial to choose [Shutter Sync.] and press the qr buttons to choose a setting.

1st-curtain

The flash fires right after the shutter

opens.

 

 

 

2nd-curtain

The flash fires right before the shutter

closes.

 

 

 

150