Trimming

You can cut out a portion of a recorded image and save it as a new image file.

Trimming Area

Trimming Area Display

Recorded pixels after trimming

Choose [Trimming].

●Press the nbutton to choose [Trimming] in the 1tab, then press the m button.

Choose an image.

●Press the qrbuttons or turn the Âdial to choose an image, then press the m button.

Adjust the trimming area.

XA frame will appear around the portion of the image to be trimmed.

XThe original image will display in the upper left and the trimmed image will display in the lower right.

●If you move the zoom lever to the left or right, you can change the frame size.

●If you press the opqr buttons, you can move the frame.

●If you press the mbutton, you can change the frame orientation.

●In an image with detected faces, gray frames appear around the faces located in the upper left image. The frames can be used for trimming. You can switch between frames by turning the  dial.

●Press the nbutton.

Save as a new image and display.

●Follow Steps 4 and 5 on p. 127.

128