Canon 1000 HS, SD4500 IS Choose [Connection info], Disabling Eye-FiTransfer, Checking Connection Information, Choose [Disable] in [Eye-Fitrans.]

Using an Eye-Fi Card

Checking Connection Information

You can check the Eye-Fi card’s access point SSID, or connection status.

Choose [Connection info].

●Press the nbutton, then choose [Eye-Fi Settings] from the 3 tab, and press the m button.

●Press the opbuttons or turn the Âdial to choose [Connection info], then press the m button.

XThe Connection info screen will appear.

Disabling Eye-Fi Transfer

You can set the card to disable Eye-Fi transfer.

Choose [Disable] in [Eye-Fi trans.].

●ress the nbutton to choose [Eye-Fi Settings] from the 3 tab, then press the m button.

●Press the opbuttons or turn the Âdial to choose [Eye-Fi trans.], then press the qrbuttons to choose [Disable].

What if [Eye-Fi Settings] does not appear?

[Eye-Fi Settings] will only appear when an Eye-Fi card is inserted in the camera.

If the Eye-Fi card has a write-protect tab, you will not be able to check the card's connection status, or set [Eye-Fi trans.] to [Disable] when the tab is in the locked position.

156