a: Wireless Multiple Flash Shooting with Flash Ratio 
Autoflash Shooting with Two Slave Groups
| You can divide the slave units into two |
| firing groups, A and B, and adjust the |
| lighting balance (flash ratio) for shooting. |
| The exposure is controlled automatically |
| so that the total flash output of firing |
B | groups A and B results in the standard |
exposure. | |
A |
|
1 | Set the firing group of the slave |
| units. |
Operate and set the slave units one by one.
Set one unit to <4> and set the other to <5>.
For the slave unit settings, see the flash’s instruction manual.
2 Display <N>.
The operations in steps 2 to 4 are set on the master unit.
Press the master unit’s function button 4 to display <N>.
3 Set to <%>.
Press function button 2 <T> and set to <%>.
31