Canon ST-E3-RT 46

Linked Shooting

1 Set to linked shooting mode.

Press the <I> button continuously until <b> is displayed on the LCD panel.

XLinked shooting mode’s “Slave unit” is set.

Press the <I> button again to set “Master unit” of the linked shooting mode.

2 Set the channel and ID.

Set the channel by pressing function button 2 <C>, and set the ID by pressing function button 3 <H>. For details on the setting procedure, see pages 20 to 22.

Set the camera’s shooting functions.

Set all the transmitters.

Repeat steps 1 to 3 and set all the transmitters to “Master unit” or “Slave unit” in the linked shooting mode. Set the Speedlites used in linked shooting in the same way.

When pressing the <I> button to change the setting of a unit from “Slave unit” to “Master unit,” the other transmitters (or Speedlites) that were set to “Master unit” until then automatically switch to “Slave unit”.