To select the photo capture settings

FUNC. [ Menu] [Photo Capture from Video] [ Single Photo] or [ Photo Sequence]

Continue from the same menu:

[Photo Capture Quality] Desired photo quality* FUNC.

*The number displayed at the bottom indicates the approximate number of photos that can be recorded with the current quality setting.

To capture the photo(s)

1Play back the scene containing the picture you want to capture.

2 Pause the playback at the point you want to capture.

3 Press PHOTO fully.

To capture a photo sequence, hold PHOTO pressed down.

NOTES

The data code of the photos will reflect the date and time of recording of the original scene.

Photos captured from a scene with a lot of fast movement may be blurred.

Photos will be recorded on the memory selected for recording photos.

[ Photo Sequence]:

-Up to 100 photos can be captured at a time.

-The photo sequence capture will stop when the end of the scene is reached (playback will pause at the beginning of the following scene).

-Photos will be captured at intervals of 1/30 second (1/24 second, if the scene was recorded at a frame rate of [ PF24]).

Protecting Photos

You can protect photos from accidental erasure.

Operating modes:

Protecting Single Photos

1 In single photo view, open the photo selection screen.

 

FUNC.

[

Protect]

[

Protect] appears on the screen.

108 Š Photos