•When the camcorder stops recording, the screen will momentarily turn black as if a camera shutter had released.

•In the movie index screen, video snapshot scenes are indicated with the mark.

Capturing Video Snapshot Scenes from a Movie

Operating modes:

1 Play back the movie containing the scene you want to capture.

2Press START/STOP at the point you want to capture.

•The camcorder captures a video snapshot scene (the blue frame serves as a visual progress bar) and then automatically changes to playback pause mode.

•When the camcorder finishes capturing, the screen will momentarily turn black as if a camera shutter had released.

NOTES

•A video snapshot scene can be captured only during playback; it can- not be captured during playback pause mode.

•The captured video snapshot scene is saved to the same memory that contains the movie.

•Video snapshot scenes cannot be captured from any of the following types of movies.

-Movies shorter than 1 second

-Movies recorded using another device

-Video snapshot scenes

-Scenes that were edited using the software on the supplied Video Tools CD-ROM and were then written back to the camcorder.

•Video snapshot scenes cannot be captured if there is not enough space available in the memory.

•When you start capturing a video snapshot scene less than 1 second from the end of the scene, the video snapshot scene will be captured starting from the beginning of the following scene.

•During the playback of video snapshot scenes captured from a previ- ously recorded movie, you may notice some anomalies in the picture/ sound at the point where the playback switches to a new scene.

68 Š Video