Camera Summary - Add, Edit and Delete a Storage Server
When using multiple Storage Servers, you will need to configure the Storage Servers via
the Add Storage Server dialog shown below.
A Storage Server must first be connected and running on the network as follows:
Click the Add Storage Server button on the Storage Servers tab
In the Camera Summary window, select
the Storage Servers tab.
Click the Add Storage Server button.
The Add Storage Server dialog opens.
Configure Camera Summaries
46
Enter connection settings
and click OK.
Double-click a server in the list; or click to highlight it and click the Edit button. The
Edit Storage Server dialog appears with the selected server entry displayed.
Modify the entry and click OK to close and save changes.
This function lets you change the network address used to
access a particular Storage Server in case the address has
changed.
The entry for the Master Storage Server cannot be edited or
deleted.
Note
1
3
2
1
2
To edit a Storage Server:
It is not recommended to add the same Storage Server more
than once (for example, by using Host Name one time and using
a corresponding IP address another time).
If you add a Storage Server with a different configuration (such
as one managed by another Master Storage Server), your
original Locations and Zones will be lost.
Note