54
Using the Add Camera Server Dialog
Step 3: Select the Storage Server for recording
Select a Storage Server from the
drop-down menu which lists
pre-configured Storage Servers and
enter the Host Name or IP address
and Port number.
If you do not wish the camera
server to be recorded, select the Do
Not Record option from the
drop-down menu.
1
2
Setting a value for the Storage Server does not mean that video
will be automatically recorded. Please refer to the next chapter
for information on setting recording schedules.
There is a maximum number of 64 camera servers that can be
registered on one Storage Server with VK-64 (or 16 cameras
with Network Video Recorder VK-16 v1.1).
Note
Step 4: Select the input state for the camera server
In the Camera Server Settings field, one
or more Input boxes may display,
depending on the camera server setup. If
a sensor input is received, you can swap
its value from ‘on’ to ‘off’ (with respect to
the operation of schedules) by ticking the
Input box. This acts as a ‘toggle’control.
If you have a Multi-Terminal Module VB-EX50 unit plugged into a
VB-C50i/VB-C50iR/VB-C50FSi/VB-C50Fi and have configured the
‘Use External Video Input’, video seen in the Viewer will be taken
from cameras connected to the Multi-Terminal unit. Please refer to
the camera server User’s Manual.
Note