Canon X-Loupe manual Canon Digital Camera Basic Setup Micro-Photography

Basic Skills for Micro-Photography

the conventional microscopy. Sometimes, moving X-Loupe up and down a little bit can reach the best focus. The AF (autofocus) green frame(s) on the LCD means good focus, whereas orange means close to the focus but not good enough.

	Working Distance	Depth of Focus
60x	4~4.43cm	1.8mm
150x	1.1~1.3cm	0.8mm
300x	0.8cm	0.25mm

6. Movie:

Due to the large size of a movies file, please use 512MB SD card or above to avoid losing the important scene. The 1.6X and 2.0X of Digital Tele- Converter are not available for the movie function.

Canon Digital Camera Basic Setup – Micro-Photography

Although X-Loupe G Series work together with Canon IXUS 800IS/ 950IS digital cameras, the factory default setting of IXUS 800IS/950IS is not meant to be used in the micro-photography. Therefore, the camera settings have been altered to meet the micro-photography requirement prior to its shipping. Please refer to the following list and explanation.

Pictures shown here are based on Canon digital camera IXUS 800IS and for reference only.

Adjust the Zoom to its maximum optical value, 4.0X. (This is the standard setting for X-Loupe.)

The Manual Mode is required for micro-photography.

Please do NOT use Macro or Infinity Shots Mode.

Set the Exposure Compensation to zero and the range is from -2 to +2. The shutter speed (Long Shutter Mode) can be set as high as 15 seconds.

page46 page47