We recommend powering the camcorder from a household power outlet. |
|
| ||
When connecting to the RCA terminal, set the RCA/BNC selector down to RCA. When connecting |
|
| ||
to the BNC terminal, set the RCA/BNC selector up to BNC. |
|
| ||
E |
| |||
TV sets with |
| 48) will |
| |
|
| |||
|
| |||
automatically be played in widescreen mode if you connect the camcorder to the TV using the S1- |
|
| ||
VIDEO terminal. |
|
| ||
TV sets equipped with the 
48) will automatically be played in widescreen mode whether you connect the camcorder to the TV using the
In fast forward playback, rewind playback and reverse playback of a tape recorded in HDV mode, the picture may be distorted.
Connection to a Normal TV or Monitor
1 Using the COMPONENT OUT
Refer to the connection diagram in the previous section (
101).
Select the appropriate component video signal depending on the TV or monitor you connect.
Open the menu and select [SIGNAL SETUP]. Select [COMP. OUT], select a setting option and close the menu.
2 Using the
Refer to the connection diagram in the previous section (
102).
If connecting to a TV set the input selector to VIDEO. If connecting to a VCR, set the input selector to LINE. Refer also to the instruction manual of the TV or VCR.
We recommend powering the camcorder from a household power outlet.
When connecting to the RCA terminal, set the RCA/BNC selector down to RCA. When connecting to the BNC terminal, set the RCA/BNC selector up to BNC.
TV sets with 
48) will automatically be played in widescreen mode if you connect the camcorder to the TV using the S1- VIDEO terminal.
TV sets equipped with the 
48) will automatically be played in widescreen mode whether you connect the camcorder to the TV using the
In fast forward playback, rewind playback and reverse playback of a tape recorded in HDV mode, the picture may be distorted.
Playback
103