Recording Still Images on a Memory Card

You can record still images with the camcorder, from a tape in the camcorder. You can also record a still image on the memory card while you record a movie on the tape.

PHOTO button

Card access indicator

TAPE/CARD switch

1. Turn the POWER dial to a recording program and move the TAPE/CARD switch to . 2. Press the PHOTO button halfway.

• The symbol turns green once the focus is adjusted. The picture may appear out of focus for a moment while the camcorder is focusing.

• While the PHOTO button is half-pressed you can also use the focusing ring to adjust the focus.

• Exposure is locked.

•When you press the PHOTO button on the wireless controller, recording starts immediately.

3. Press the PHOTO button fully.

• The symbol disappears.

• The CARD access indicator flashes and the card access display appears.

Do not turn off the camcorder, change the position of the TAPE/CARD switch or the POWER dial, open the memory card cover or remove the memory card while the CARD access indicator is flashing. Doing so could result in data damage.

When you are using an SD Memory Card, make sure that the protect switch is set to allow recording.

116