Canon ZR600, ZR700 to search, Record Review, Record Search, pushed ( ) towards, to search forward towards, 1. Set the program selector to, 1. Set the program selector to

Reviewing and Searching when Recording

Program selector

Joystick

E

Record Review

In record pause mode, this function allows you to review the last few seconds of your recording to check if it has been recorded properly.

1. Set the program selector to .2. If the joystick guide does not appear on screen, press ( ) to display it.3. Push the joystick () momentarily towards and release it.

The camcorder rewinds the tape, plays back the last few	EXP
seconds, and returns to record pause mode.
	FOCUS

Record Search

In record pause mode, this function allows you to play back the tape (forward or reverse) to locate the point where you wish to begin recording.

1. Set the program selector to .

2. If the joystick guide does not appear on screen, press ( ) to display it.

3. Hold the joystick pushed ( ) towards		to search	EXP
back towards the beginning of the recording or
pushed ( ) towards	to search forward towards		FOCUS
the end of the recording.

•Release the joystick at the point where you wish to begin recording.

•The camcorder returns to record pause mode.

Recording Functions Basic

25