Reviewing a Still Image Right after Recording

You can select to display a still image for 2, 4, 6, 8 or 10 seconds after it has been recorded.

MENU

CAMERA SETUP REVIEW 2sec

( 36)

E

1.Open the FUNC. menu, select () the icon and press ().

2.Select () the [CAMERA SETUP] menu and press (). Then, select () the [REVIEW] option and press ().

3.Select a setting option and press () to save the changes, then close the menu.

A still image is displayed as long as you hold the PHOTO button after recording.

If you press the FUNC. button while you are reviewing the still image

immediately after recording it, a menu appears where you have the option to protect ( 93) or erase ( 94) the image you just recorded.

Screen Displays during Still Image Recording

Remaining Card Capacity for Still Images

flashing in red: No card

in green: 6 or more images

in yellow: 1 to 5 images in red: No more images

•The indication may not decrease even though a recording has been made, or may decrease by 2 images at once.

•All indicators are displayed in green when a memory card is played back.

“” Card Access Display

Indicates that the camcorder is writing on the memory card.

Still Image Size and Quality

Indicates the size and quality of the still image.

Card Memory a Using

87