Adjusting the Volume
When you use the LCD screen for playback, the camcorder plays back the sound via
E
AV
H (phones) terminal
SET dial |
The headphones terminal also serves as AV terminal. Headphones can only be used when "H" is displayed on the screen. If not, change the setting following the procedure below.
CAMERA | PLAY (VCR) | CARD CAMERA | CARD PLAY |
VCR SETUP |
| AV/PHONES | ••AV |
( | 39) |
Open the menu and select [VCR SETUP]. Select [AV/PHONES H], set it to [PHONES H] and close the menu.
❍The
❍Do not connect headphones unless “H” is displayed as it produces noise.
Adjusting the VolumeCAMERA | PLAY (VCR) | CARD CAMERA | CARD PLAY |
• A volume bar appears for 2 seconds.
•You can turn off the volume completely by turning the SET dial
down until [OFF] appears. Turn the SET dial up to increase the volume again.
Playback | Functions Basic |
| - |
35