Canon ZR90, ZR85, ZR80 Playback, Memory Card Operation

Playback

Pressing the playback	Camcorder is turned off, or is	Set the camcorder to PLAY	33
button does not start	not set to PLAY (VCR) mode.	(VCR) mode.
playback.
	Cassette is not loaded.	Load a cassette.	16
	Tape reached the end (	Rewind the tape.	33
	flashes on the screen).
Image will not appear	[AV/PHONESH] is set to	Set [AV/PHONESH] to [AV] in	36
on the TV screen.	[PHONESH] in the menu.	the menu.
	[AV \ DV OUT] is set to	Set [AV \ DV OUT] to [OFF].	85
	[ON].
Tape is running, but	TV/VIDEO selector on the TV	Set the selector to VIDEO.	36
image will not appear	is not set to VIDEO.
on the TV screen.
	Video heads are dirty.	Clean the video heads.	135
	You attempted to play back	Stop playback/dubbing.	–
	or dub copyright protected
	tape.
No sound from the built-	Speaker volume is turned	Adjust the volume with the	35
in speaker.	off.	SET dial.

Memory Card Operation

	Problem	Cause	Solution
Memory card cannot be		Memory card was not facing	Turn the memory card over	92
inserted.		the correct direction.	and reinsert it.
Memory card cannot be		Memory card is full.	Replace the memory card or	92
recorded.			erase images.
		Memory card is not	Format the memory card.	117
		formatted.
		Memory card is not inserted.	Insert a memory card.	92
		File number reached	Set [FILE NUMBERS] to	95
		maximum value.	[RESET] and insert a new
			memory card.
		SD Memory Card is	Change the position of the	92
		protected.	protect switch.
Memory card cannot be		Camcorder is not set to	Set the camcorder to CARD	106
played back.		CARD PLAY mode.	PLAY mode.
		Memory card is not inserted.	Insert a memory card.	92
Image cannot be erased.		Image is protected.	Cancel the protection.	109
		SD memory card is	Change the position of the	92
		protected.	protect switch.
	flashes red.	Card error occurred.	Turn off the camcorder.	117
			Remove and reinsert the
			memory card. Format the
			memory card if flashing
			persists.

142