Pioneer SC-35 manual Flicker Reduction Setup, RF Remote Setup SC-37only, Multi Channel Input Setup

12The System Setup and Other Setup menus

Flicker Reduction Setup

• Default setting: OFF

The GUI screen’s resolution can be increased. If you feel the GUI screen is hard to see, try changing this setting. Note that the resolution in this setting only affects the GUI screen; it has no influence on the video output.

1Select ‘Flicker Reduction Setup’ from the Other Setup menu.

2Select the Flicker Reduction setting you want.

3When you’re finished, press RETURN.

You will return to the Other Setup menu.

RF Remote Setup (SC-37 only)

• Default setting: OFF

The CU-RF100 can be used to operate the receiver by RF communications. To do so, set the RF Remote setting to ON. When ON is set here, the receiver can be operated even when the receiver is in the standby mode.

1Select ‘RF Remote Setup’ from the Other Setup menu.

2Select the RF Remote setting you want.

3When you’re finished, press RETURN.

You will return to the Other Setup menu.

Multi Channel Input Setup

You can adjust the level of the subwoofer for a multi- channel input. Also, when the multi-channel input is selected as an input function, you can display the video images of other input functions. In the Multi Channel Input Setup, you can assign a video input to the multi- channel input.

1Select ‘Multi Ch In Setup’ from the Other Setup menu.

2Select the ‘SW Input Gain’ setting you want.

•0dB – Outputs sound of the subwoofer at the level originally recorded on the source.

•+10dB – Outputs sound of the subwoofer at the level increased by 10 dB.

3Select the ‘Video Input’ setting you want.

When the multi-channel input is selected as an input function, you can display the video images of other input functions. The video input can be selected from the following: DVD, TV/SAT, DVR/BDR, VIDEO, OFF.

4When you’re finished, press RETURN. You will return to the Other Setup menu.

EXTENSION Setup (SC-35 only)

• Default setting: OFF

The CU-RF100 can be used to operate the receiver by RF communications. To do so, set the EXTENSION setting to ON. When ON is set here, the receiver can be operated even when the receiver is in the standby mode.

1Select ‘EXTENSION Setup’ from the Other Setup menu.

2Select the EXTENSION setting you want.

3When you’re finished, press RETURN.

You will return to the Other Setup menu.

120

En