Pioneer SC-35 manual Control with HDMI function HDMI Setup, Before using synchronization

Control with HDMI function

HDMI Setup

You must adjust the settings of this receiver as well as the connected Control with HDMI-compatible components in order to make use of the Control with HDMI function. For more information see the operating instructions for each component.

1Set the remote control to the receiver operation mode, then press HOME MENU.

2Select ‘System Setup’, then press ENTER.

3Select ‘Other Setup’, then press ENTER.

4Select ‘HDMI Setup’, then press ENTER.

5Select the ‘Control’ setting you want.

Choose whether to set this unit’s Control with HDMI function ON or OFF. You will need to set it to ON to use the Control with HDMI function.

When using a component that does not support the Control with HDMI function, set this to OFF.

•ON – Enables the Control with HDMI function. When this unit’s power is turned off and you have a supported source begin playback while using the Control with HDMI function, the audio and video outputs from the HDMI connection are output from the TV.

•OFF – The Control with HDMI is disabled.

Synchronized operations cannot be used. When this unit’s power is turned off, audio and video of sources connected via HDMI are not output.

6Select the ‘Control Mode’ setting you want. Choose whether you want to enable HDMI for all linked functions or the PQLS function only. However, Display Power Off will activate the settings set forth in step 7 below.

•ALL – Enabled for all linked functions.

•PQLS – Enabled only for the PQLS function. When PQLS is selected, link functions other than the PQLS function may not work properly. If you wish to use all link functions, select ALL.

7Select the ‘Display Power Off’ setting you want. If the TV’s power is turned off while using the Control with HDMI function, the receiver’s power is also turned off (all power off function). This function can be disabled.

•YES – The all power off function is enabled. The receiver’s power turns off together with the TV’s power.

This function only works when the input for a component connected to the receiver by HDMI connection is selected or when watching the TV.

•NO – The all power off function is disabled. The

receiver’s power is not affected when the TV’s power is turned off.

08

8 Select the ‘Standby Through’ setting you want.

It is possible to transfer signals from an HDMI-connected player to the TV when this receiver's power is on standby as long as Control is ON, but the amount of energy consumed rises. It is, however, possible to minimize energy consumption when power is set to standby.

•Normal – Regular setting. Power-up time from standby is short.

•Eco – Conserves energy while standby. Power-up time is longer than when set to Normal.

9 Select the ‘TV Audio’ setting you want.

When a TV supporting the HDMI Audio Return Channel function is connected to the receiver, the sound of the TV can be input via the HDMI terminal.

•Normal – The TV’s sound is input from the Audio input terminals other than HDMI inputs.

•via HDMI – The TV’s sound is input via the HDMI terminal. This can only be selected when Control is set to ON.

10 Select the ‘12V Trigger’ setting you want.

The component connected to the 12V TRIGGER jack can be turned on and off when HDMI OUT is switched. HDMI OUT 1, HDMI OUT 2 or OFF can be selected. Select OFF when you want the component to switch when the input function is switched.

11 When you’re finished, press HOME MENU.

Before using synchronization

Once you have finished all connections and settings, you must:

1Put all components into standby mode.

2Turn the power on for all components, with the power for the TV being turned on last.

3Choose the HDMI input to which the TV is connected to this receiver, and see if video output from connected components displays properly on the screen or not.

4Check whether the components connected to all HDMI inputs are properly displayed.

73

En