Pioneer SC-35 Controlling components, Using multi operations, Using System off, Press  Source

10Controlling the rest of your system (In case of SC-37)

8Repeat steps 5 to 7 to program a sequence of up to commands.

9When you’re finished, use / to select ‘EDIT

EXIT’ from the menu and press ENTER.

You will return to the remote control Setup menu. Select EXIT SETUP to exit.

Using multi operations

You can start multi operations with the receiver switched on, or in standby.

RECEIVER MAIN			SOURCE
	ZONE2	3
		MULTI
		OPERATION
		BDR
BD	DVD	DVR	HDMI
		NET RADIO
TV	CD	HMG	ADAPTER
USB		OPTION
iPod	TUNER	1	2
	MULTI CH

1 Press MULTI OPERATION.

MULTI OPERATE flashes in the display.

2Press an input function button that has been set up with a multi operation.

The receiver switches on (if it was in standby) and the programmed multi operation is performed automatically.1

Using System off

RECEIVER MAIN			SOURCE
	ZONE2	3
		MULTI
		OPERATION
		BDR
BD	DVD	DVR	HDMI
		NET RADIO
TV	CD	HMG	ADAPTER
USB		OPTION
iPod	TUNER	1	2
	MULTI CH

1 Press MULTI OPERATION.

MULTI OPERATE flashes in the display.

Controlling components

This remote control can control components after entering the proper codes (see Selecting preset codes directly on page 84). Set the remote control operation selector switch to SOURCE, then press the input function buttons to select the component.

•TV CONTROL on the remote control are dedicated to control the TV assigned to the TV operation selector switch. If you have two TVs, assign the main TV to the TV operation selector switch.

RECEIVER MAIN			SOURCE
	ZONE2	3
		MULTI
		OPERATION
		BDR
BD	DVD	DVR	HDMI
		NET RADIO
TV	CD	HMG	ADAPTER
USB		OPTION
iPod	TUNER	1	2
	MULTI CH
PHONO	IN	VIDEO	CD-R
	INPUT SELECT		LIGHT
AUX

TV SOURCE RECEIVER

CH VOL

VOL

TV CONTROL

INPUT MUTE MUTE

AUDIO		VIDEO
PARAMETER	TUNE	PARAMETER
LIST		TOOLS
TOP MENU		T.EDIT
BAND		GUIDE

PRESET ENTER PRESET

CATEGORYRETURN

HOME
MENU	TUNE
iPod CTRL		PTY SEARCH
STATUS	PHASE CTRL	CH LEVEL

THX MPX PQLS MEMORY

2 Press  SOURCE.

The command sequence you programmed will run, then

all Pioneer components will switch off2, followed by this receiver.3

AUTO/ALC/	STEREO	STANDARD ADV SURR
DIRECT
PGM	MENU
SIGNAL SEL	SLEEP	DIMMER	AUDIO
A.ATT	SBch	MCACC	INFO
			DISP
		HDMI OUT
D.ACCESS		CLASS	CH

ENTER

CLR

Note

1With this remote control, the IR and RF modes can be selected separately for the individual input functions. To perform a multi operation on a device (input function) for which the IR mode is selected, point the remote control toward the remote sensor on that device.

2In order to avoid accidently switching off a DVD recorder that is currently recording, no DVD recorder power off codes are sent.

3• With this remote control, the IR and RF modes can be selected separately for the individual input functions. To turn off the power of a device (input function) for which the IR mode is selected using the System Off function, point the remote control toward the remote sensor on that device.

• When the power code of another brand is registered, the power on/off operation may be inverted. When using the System Off function for a multi operation including the power codes of other brands, always check that the power of all the components has turned off.

88

En