Pioneer SC-35 manual Operating range of remote control unit, SC-37only, Before you start

Before you start

Operating range of remote control unit

The remote control may not work properly if:

•There are obstacles between the remote control and the receiver’s remote sensor.

•Direct sunlight or fluorescent light is shining onto the remote sensor.

•The receiver is located near a device that is emitting infrared rays.

•The receiver is operated simultaneously with another infrared remote control unit.

30° 30°

7 m (23 ft.)

Tip

•By connecting an RF adapter to the RS-232C and CU- RF100 terminals (SC-37) / EXTENSION terminals (SC- 35), the CU-RF100 omni-directional remote control can be used for RF two-way communications with the receiver.1 With RF two-way communications, the information of the receiver’s display can be displayed on the remote control in your hands and the remote control can be operated without worrying about obstacles or the direction in which the remote control is pointing.2 For details, see Flow for operating the receiver with RF two-way communications (SC-37 only) below.

01

Flow for operating the receiver with RF two-way communications

(SC-37 only)

This remote control unit is set for operations using

infrared signals upon shipment from the factory. To set it for RF operations, take the steps below.

1Connecting the RF adapter to the RS-232C and CU- RF100 terminals.

•Connecting the RF adapter (SC-37 only) on page 21



2Setting the ‘RF Remote Setup’ to ‘ON’.

•RF Remote Setup (SC-37 only) on page 120



3Pairing the RF adapter and remote control.

•Pairing the RF adapter and remote control on page 92



4Setting ‘RECEIVER MAIN’ to ‘RF MODE’ for the remote control unit’s ‘IR/RF SELECT’ setting.

•Operating this receiver by RF communications on page 92

Note

1The RF adapter and CU-RF100 omni-directional remote control are included with the SC-37, sold separately with the SC-35.

2The maximum line-of-sight distance for RF two-way communications is about 10 meters. This line-of-sight communications distance is a rough indication, and may differ according to the surrounding environment.

11

En