Pioneer SC-35 manual Connecting your equipment, Connecting the RF adapter, SC-37only, front panel

Connecting your equipment

Note

•The input functions below are assigned by default to the receiver’s different input terminals. Refer to The Input Setup menu on page 45 to change the assignments if other connections are used.

Input function		Input Terminals
	Digital	HDMI	Component
DVD	COAX-1		IN 1
BD		(BD)
TV/SAT	OPT-1
DVR/BDR	OPT-2		IN 2
VIDEO	OPT-3		IN 3
HDMI 1		(HDMI-1)
HDMI 2		(HDMI-2)
HDMI 3		(HDMI-3)
HDMI 4		(HDMI-4)
HDMI 5		(HDMI-5)
(front panel)
CD	COAX-2
CD-R/TAPE	COAX-3a

a.SC-37 only.

•SC-35 only: The CU-RF100 omni-directional remote control (separately sold) can be connected to the RS- 232C and EXTENSION terminals. Using the CU- RF100 lets you display the receiver’s display information on the remote control display in your hands and operate it without worrying about obstacles or the direction in which the remote control is pointing.

RS-232C

(OUTPUT 5 V

150 mA MAX)

EXTENSION

CAUTION

•Before making or changing the connections, switch off the power and disconnect the power cord from the power outlet. Plugging in should be the final step.

03

Connecting the RF adapter

(SC-37 only)

Two-way communications between the receiver and

remote control are possible by connecting the included RF adapter to the RS-232C and CU-RF100 terminals on the receiver. For the features of two-way communications and detailed usage instructions, see Using the RF communications function on page 91.

MONITOR OUT

ZONE 2 OUT

Y	PB	PR
		ANTENNA
		AM LOOP	FM UNBAL 75
RS-232C		CONTROL	IN 1	IR		12V
		IN			1 TRIGGER
(OUTPUT 5 V			IN 2			(OUTPUT
150 mA MAX)		OUT				12V
					2	TOTAL
						150 mA MAX)
CU-RF100				OUT

RF adapter

21

En