INSTALLATION

OPTIONAL

LOG SET

BRICK PANELS

INSTALLATION

02-7502-51

1)Open the bottom louver door. Loosen the 2 screws holding the Burner ON/OFF switch and bracket to the bottom louver and lift the assembly out.

2)Remove Arch Surround.

3)Remove glass door. Remove logs.

Note: The logs must not be in the unit.

4)Insert the back brick panel fi rst by carefully slipping it between the back wall of the fi rebox and the rear log bracket.

5)Put the side panels in next. Slide them in from the front and push them fl at up against the wall. Be very careful not to scratch them on the fi rebox hardware.

6)Install the 2 brick retaining clips, one on each side.

Note:Ifthe bottom brick panel must beremoved: Remove the Rear Log Stand, then remove the Burner Tray. See the "Removing Valve" section.

Read the instructions below carefully and refer to the diagrams. If logs are broken do notusetheunituntiltheyarereplaced.Broken logs can interfere with the pilot operation.

The gas log kit (Part # 780-930) contains the following pieces:

a)02-75 Rear Log

b)02-55 Middle Left Log

c)02-50 Front Left Log

d)02-53 Center Left Log

e)02-51 Front Bottom Log

f)02-54 Center Right Log

g)02-52 Middle Right Log

h)Embers 902-156

02-75

02-54

02-52

02-50 02-53 02-51 02-54

The "02" refer numbers (i.e. 02-75) are

molded into the rear of each log.

NOTE: If you will be installing the optional Brick Panels, install the Brick Panels prior to installing the logs.

1)Carefully remove the logs from the box and unwrap them. The logs are fragile, handle with care - do not force into position.

2)Sprinkle the vermiculite all over the top of the base brick panel.

3)Place the Log 02-75 on the rear log support pins with the fl at side to the back.

02-75

4)Place Log 02-51 on the front right side of the burner. Push the back of the log against the 2 brackets with the notch on the bottom right side of the log fi tting into the right side of the grate.

Bracket

Bracket

Notch

02-51Notch

5)Position Log 02-53 across the cutouts in Logs 02-75 and 02-51 with the notch on the left side of the log fi tting into the 2nd grate tab.

02-53

02-75

02-51

2nd Grate Tab

Cutouts

02-53 02-51

6)Position Log 02-54 across the cutouts in Logs 02-51 and 02-53. The notch in the bottom right end fi tting against the 5th grate tab.

02-54

53

02-51

-

02

 

5th Grate Tab

Excalibur® P90 Zero Clearance Direct Vent Gas Fireplace

29

Page 28 Page 30
Page 29
Image 29
CarAlarms.com P90-NG1 manual 02-75 02-54 02-52 02-50 02-53 02-51, Bracket, 2nd Grate Tab, 5th Grate Tab
Page 28 Page 30

P90-NG1 specifications

CarAlarms.com P90-NG1 is a cutting-edge vehicle security system designed to provide maximum protection against theft and unauthorized access. This advanced system combines innovative technology with user-friendly features to ensure that car owners can safeguard their vehicles effectively.

One of the standout features of the P90-NG1 is its two-way communication system. This allows users to receive real-time alerts and notifications directly on their key fob whenever the system detects any suspicious activity. The LCD display on the key fob provides clear information, including the vehicle's status, which enhances the overall user experience. This feature ensures that users are always informed about their vehicle’s security status, whether they are close by or a significant distance away.

The P90-NG1 also employs a state-of-the-art shock sensor, which detects impacts on the vehicle's body. This allows the system to respond swiftly to attempted break-ins or vandalism, triggering an audible alarm to deter potential thieves. The adjustable sensitivity of the shock sensor can be customized to suit different environments, ensuring that users can find an optimal balance between security and everyday usability.

Another notable characteristic of the P90-NG1 is its remote start capability. This feature enables users to start their vehicle from afar, adding convenience, especially in harsh weather conditions. Paired with the optional smartphone app, users can control their vehicle’s security functions from their mobile devices, providing added flexibility and peace of mind.

The installation process of the P90-NG1 is designed to be straightforward and efficient, making it suitable for a wide range of vehicles. The system is compatible with various vehicle models and can be integrated seamlessly with existing systems, providing enhanced functionality without compromising factory features.

In conclusion, CarAlarms.com P90-NG1 stands out in the vehicle security market due to its robust features, advanced technology, and user-centric design. With its reliable two-way communication, effective shock sensor, and convenient remote start capability, it offers vehicle owners a comprehensive solution to protect their assets while ensuring ease of use. This makes the P90-NG1 an ideal choice for those looking to enhance the security of their vehicles.
Top Page Image Contents