Before Using Charging Headset, SET UP and Configuration

2 Wall Chargers

2 Allen Wrenches

2 sets of Velcro Pads

2 MP3 Cables

2 MP3 Cable Holders

2 Glue Plates

2 Pre-moistened Towelettes

2 Carry-Pouches

4 Microphone Sponges

Flat sponge for full-face helmets and round sponge for other helmet types

User Guide, including Warranty and Registration form

IMPORTANT:

Your headsets are water-resistant, designed for use under moderate rain or snow conditions. However, the headsets are not waterproof and should not be used under severe weather conditions.

The cover tongue protecting the Charging Jack should be kept tightly closed at all times to prevent moisture from entering the device.

NOTE: WHILE MOST INSTRUCTIONS IN THIS MANUAL REFER TO THE HEADSET IN THE SINGULAR, THEY APPLY TO BOTH UNITS UNLESS INDICATED OTHERWISE.

BEFORE USING (CHARGING THE

HEADSET)

Make sure that the headset is fully charged for at least five hours before initial use.

1.Connect the wall charger to the headset’s Charging Jack (located between the two Volume Buttons).

2.While charging, the Red Light turns on (it may take up to 15 seconds until the Red Light turns on). When charging is complete, the Red Light will turn off.

4 scala rider® Q2™ MultiSet

SET UP AND CONFIGURATION

	Built-in	GPS
Mobile	FM radio	MP3
Mobile		MP3
phone		player

Driver-to-
Passenger
Full-duplex
Intercom
Connection	Bike-to-Bike Intercom
	Bike-to-Bike Intercom
scala rider Q2 or	up to 500 m / 540 yd
other scala rider	)in open terrain(
headset
headset

STEP 1

SET UP FOR BIKE-TO-BIKE INTERCOM: PAIRING

Pairing is a one time process that is required for mutual recognition be- tween a headset and other Bluetooth devices. Once the two headsets are paired, they will remain paired and automatically recognize each other whenever they are within range. The two headsets in your retail box are already factory paired and relate to each other as the Primary Buddy connection. In addition, each unit can be paired with an addi- tional scala rider headset for Intercom communication. Please note that you can speak via Intercom to one Buddy headset at a time.

NOTE: This Manual refers to the Intercom users and other parties as: Primary Buddy and Secondary Buddy.

Q2 specifications

The Cardo Q2 is an innovative communication system designed specifically for motorcyclists, enhancing the riding experience through seamless connectivity and advanced features. Manufactured by Cardo Systems, a leader in the motorcycle communication industry, the Q2 sets the standard for rider intercom technology with its robust functionality and user-friendly design.

One of the main features of the Cardo Q2 is its ability to facilitate intercom communication between riders. The system utilizes Bluetooth technology to connect with other Q2 units or compatible devices, allowing for clear and reliable communication over distances of up to 1.6 kilometers (approximately one mile). This range is particularly beneficial for group rides, ensuring that all participants can keep in touch without the need for cumbersome hand signals or stopovers.

The Q2 is equipped with advanced noise cancellation technology, significantly reducing the sound of wind and road noise, which can often interfere with communication. This feature is crucial for maintaining clear audio quality, allowing riders to communicate at high speeds and in varying weather conditions without distraction.

In terms of usability, the Cardo Q2 boasts an intuitive interface. It includes large, glove-friendly buttons that simplify operation, even with riding gloves on. The modular design of the Q2 allows for easy installation on various helmet types, making it a versatile choice for riders with different preferences.

Additionally, the Q2 supports music sharing and can connect to smartphones via Bluetooth, enabling riders to enjoy their favorite playlists or podcasts while on the road. The ability to seamlessly switch between music and intercom communication gives riders the flexibility to customize their riding experience.

The battery life of the Cardo Q2 is another standout feature. With up to 13 hours of talk time on a single charge, riders can rely on the system for long journeys without the worry of battery depletion.

Built to withstand the elements, the Q2 is water-resistant, ensuring durability in adverse weather conditions. Overall, the Cardo Q2 combines cutting-edge technology with practical design, making it an essential tool for motorcyclists seeking enhanced communication and connectivity on their adventures.

Cardo Q2 manual Before Using Charging Headset, SET UP and Configuration

Models: Q2