PRIMARY BUDDY PAIRING (two scala rider Q2 headsets)

Your two MultiSet units are already factory paired and ready for use. If for any reason, you have to pair them again, proceed as follows:

1.If either headset is turned OFF, turn it ON by pressing and holding the CTRL Button until the Blue Light flashes three times.

2.Make sure that both headsets are now flashing slowly in Blue.

3.Pick up one headset and simultaneously press and hold the CTRL Button and MC Button for at least six seconds until the Red Light begins flashing rapidly, indicating it is in Intercom Pairing mode.

4.Repeat Step 3 again for the second scala rider Q2 headset. Both headsets should now be flashing rapidly in Red.

5.Within a few seconds, both headsets will show a solid Red light for two seconds, and then begin flashing slowly in Blue.

NOTE: If the Pairing process is not completed within one minute the headset will return to Standby mode.

SECONDARY BUDDY PAIRING (requires three scala rider Q2 headsets)

In addition to the Primary Buddy pairing between the two units in your retail box you can pair your headset with the Secondary Buddy headset by repeating the above pairing procedure.

NOTE: Your headset can communicate with either the Primary Buddy or the Secondary Buddy. However, neither

the Primary Buddy nor the Secondary Buddy can communicate among each other directly via Intercom.

NOTE: If the Pairing process is not completed within one minute the headset will return to Standby mode.

STEP 2 (Optional)

SET UP FOR RIDER-TO-PASSENGER INTERCOM: PAIRING

There are two ways that the scala rider Q2 can be used for Driver-to- Passenger communication.

A. Both Rider and Passenger are using scala rider Q2 headsets (like the two units in your retail package).

To Pair the two headsets, follow the Steps listed in the section above titled PRIMARY BUDDY PAIRING (2 bikers)

B. The Rider is using a scala rider Q2 and the Passenger is using an earlier scala rider headset (i.e. a scala rider Solo, a scala rider FM or a scala rider TeamSet Driver unit headset).

To Pair the two headsets:

1.Starting with the earlier scala rider headset turned OFF, press and hold the CTRL button until the Red/Blue lights begin rapidly alternating.

2.Starting with the scala rider Q2 turned ON, simultaneously press and hold the CTRL Button and MC Button for six seconds until the Red light begins flashing rapidly, indicating it is in Intercom Pairing mode.

3.Within a few seconds, the scala rider Q2 will show a solid Red light for two seconds, and then begin flashing slowly in Blue.

NOTE: If the Pairing process is not completed within one minute the headset will return to Standby mode.

NOTE: When using an earlier scala rider headset as a Passenger head- set, Voice Connect Intercom can be initiated only by the scala rider Q2 headset. Manual Connect Intercom can be initiated from either headset by pressing the MC button for scala rider Q2 and CTRL button for any earlier scala rider headset.

RESET INTERCOM PAIRING

You can delete all of the headset’s Intercom pairings at any time.

English

scala rider® Q2MultiSet

5

Page 5
Image 5
Cardo Q2 manual Reset Intercom Pairing, Make sure that both headsets are now flashing slowly in Blue

Q2 specifications

The Cardo Q2 is an innovative communication system designed specifically for motorcyclists, enhancing the riding experience through seamless connectivity and advanced features. Manufactured by Cardo Systems, a leader in the motorcycle communication industry, the Q2 sets the standard for rider intercom technology with its robust functionality and user-friendly design.

One of the main features of the Cardo Q2 is its ability to facilitate intercom communication between riders. The system utilizes Bluetooth technology to connect with other Q2 units or compatible devices, allowing for clear and reliable communication over distances of up to 1.6 kilometers (approximately one mile). This range is particularly beneficial for group rides, ensuring that all participants can keep in touch without the need for cumbersome hand signals or stopovers.

The Q2 is equipped with advanced noise cancellation technology, significantly reducing the sound of wind and road noise, which can often interfere with communication. This feature is crucial for maintaining clear audio quality, allowing riders to communicate at high speeds and in varying weather conditions without distraction.

In terms of usability, the Cardo Q2 boasts an intuitive interface. It includes large, glove-friendly buttons that simplify operation, even with riding gloves on. The modular design of the Q2 allows for easy installation on various helmet types, making it a versatile choice for riders with different preferences.

Additionally, the Q2 supports music sharing and can connect to smartphones via Bluetooth, enabling riders to enjoy their favorite playlists or podcasts while on the road. The ability to seamlessly switch between music and intercom communication gives riders the flexibility to customize their riding experience.

The battery life of the Cardo Q2 is another standout feature. With up to 13 hours of talk time on a single charge, riders can rely on the system for long journeys without the worry of battery depletion.

Built to withstand the elements, the Q2 is water-resistant, ensuring durability in adverse weather conditions. Overall, the Cardo Q2 combines cutting-edge technology with practical design, making it an essential tool for motorcyclists seeking enhanced communication and connectivity on their adventures.