Carrier 25HCS3C warranty Physical Data, Vapor Line Sizing And Cooling Capacity Loss

PHYSICAL DATA

UNIT SIZE---SERIES, VOLTAGE	18---30	24---30	30---30	36---30	42---30	48---30	60---30
Operating Weight lb (kg)	207	204	211	252	239	314	361
	(93.9)	(92.5)	(95.7)	(114.3)	(108.4)	(142.4)	(163.8)
Shipping Weight lb (kg)	218	236	222	287	250	348	395
	(98.9)	(107.1)	(100.7)	(130.2)	(113.4)	(157.9)	(179.2)
Compressor Type				Scroll
REFRIGERANT			Freon (R--- 22)
Control			TXV (R--- 22 Hard Shutoff)
Charge lb (kg)	6.9	6.9	6.8	8.0	9.4	13.3	16.3
	(3.0)	(3.0)	(3.1)	(3.6)	(4.3)	(6.0)	(7.4)
COND FAN
Air Discharge				Vertical
Air Qty (CFM)	2233	2614	3167	3334	3334	4046	4046
Motor HP	1/12	1/10	1/5	1/8	1/8	1/4	1/4
Motor RPM	800	800	800	800	800	800	800
COND COIL
Face Area (Sq ft)	19.4	21.56	19.40	25.15	17.60	25.15	30.18
Fins per In.	20	20	20	20	20	20	20
Rows	1	1	1	1	2	2	2
Circuits	5	6	6	6	8	8	11
VALVE CONNECT. (In.) ID
Vapor	5/8”	5/8”	3/4”	3/4”	7/8”	7/8”	7/8”
Liquid				3/8”
REFRIGERANT TUBES* (in.)OD
Vapor (0--- 80 Ft Tube Length)	5/8”	5/8”	3/4”	3/4”	7/8”	7/8”	1--- 1/8
Liquid (0--- 80 Ft Tube Length)				3/8”

*For tubing sets between 80 and 200 ft. horizontal or 20 ft. vertical differential, consult the Longline Guideline. Note: See unit Installation Instruction for proper installation.

VAPOR LINE SIZING AND COOLING CAPACITY LOSS

LONG LINE APPLICATION: An application is considered ”Long	when outdoor unit is above indoor unit, and 60 ft. (18.28 m) when
line” when the total equivalent tubing length exceeds 80 ft. (24.38	the outdoor unit is below the indoor unit. Refer to Accessory
m) or when there is more than 20 ft. (6.09 m) vertical separation	Usage Guideline below for required accessories. See Longline
between indoor and outdoor units. These applications require	Application Guideline for required piping and system
additional accessories and system modifications for reliable system	modifications. Also, refer to the table below for vapor tube
operation. The maximum allowable total equivalent length is 250	diameters based on the total length to minimize the cooling
ft. (76.2 m). The maximum vertical separation is 200 ft. (60.96 m)	capacity loss.

							Cooling Capacity Loss (%)
	Maximum	Vapor Line				Total Equivalent Line Length ft. (m)
Unit Nominal	Liquid Line		Standard				Long Line Application Requires Accessories
		Diameters
Size (Btuh)	Diameters		Application
		(In.) OD
	(In. OD)
			26---50	51---80	81---100	101---125 126---150 151---175				176---200	201---225	226---250
			(7.9---15.2)	(15.5---24.4)	(24.7---30.5)	(30.8---38.1)		(38.4---45.7) (46.0---53.3)		(53.6---61.0)	(61.3---68.6)	(68.9---76.2)
18,000		5/8	0	1	1		2	3	3	4	5	5
R---22 HP		3/4	0	0	0		0	1	1	1	1	2
24,000		5/8	0	1	3		3	5	6	7	8	9
		3/4	0	0	0		1	1	1	2	2	3
R---22 HP
		7/8	0	0	0		0	0	0	0	1	1
30,000		5/8	1	3	5		6	8	10	11	13	15
		3/4	0	1	1		2	3	3	4	5	5
R---22 HP
		7/8	0	0	0		1	1	1	2	2	2
36,000	3/8	3/4	0	1	2		3	4	5	6	7	8
R---22 HP		7/8	0	0	1		1	2	2	3	3	4
42,000		3/4	1	2	3		4	5	7	8	9	10
R---22 HP		7/8	0	1	1		2	2	3	4	4	5
48,000		3/4	1	2	4		5	7	8	10	11	13
		7/8	0	1	2		2	3	4	5	5	6
R---22 HP
		1---1/8	0	0	0		0	0	1	1	1	1
60,000		7/8	1	2	3		4	5	7	8	9	10
R---22 HP		1---1/8	0	0	1		1	1	2	2	2	3

Applications in this area are long line. Accessories are required as shown recommended on Long Line Application Guidelines

Applications in this area may have height restrictions that limit allowable total equivalent length, when outdoor unit is below indoor unit See Long Line Applica- tion Guidelines

25HCS3C

3