Carrier instruction manual ÐModel 58DFA Downflow, ÐModel 58GFA Upflow, Safety Considerations

	58DFA, 58GFA
	Induced-Combustion Furnaces
	Service and Maintenance Instructions
→	For Sizes 065-150 Series 120

NOTE: Read the entire instruction manual before starting the installation.

Index	Page
SAFETY CONSIDERATIONS	1
CARE AND MAINTENANCE	1-8
Air Filter Arrangement	2-3
Blower Motor and Wheel	3-4
Cleaning Heat Exchanger	4-5
Electrical Controls and Wiring	5-6
Pilot	6
Troubleshooting	6
Unit Wiring Diagram	7
Troubleshooting Chart	8

SAFETY CONSIDERATIONS

Installing and servicing heating equipment can be hazardous due to gas and electrical components. Only trained and qualified person- nel should install, repair, or service heating equipment.

Untrained personnel can perform basic maintenance functions such as cleaning and replacing air filters. All other operations must be performed by trained service personnel. When working on heating equipment, observe precautions in the literature, on tags, and on labels attached to or shipped with the unit and other safety precautions that may apply.

Follow all safety codes. In the United States, follow all safety codes including the National Fuel Gas Code NFPA No. 54- 1992/ANSI Z223.1-1992 (NFGC). In Canada, refer to the current edition of the National Standard of Canada CAN/CGA-B149.1- and .2-M91 Natural Gas and Propane Gas Installation Codes (NSCNGPIC). Wear safety glasses and work gloves. Have fire extinguisher available during start-up and adjustment procedures and service calls.

Recognize safety information. This is the safety-alert symbol . When you see this symbol on the furnace and in instructions or manuals, be alert to the potential for personal injury.

Understand the signal word DANGER, WARNING, or CAU- TION. These words are used with the safety-alert symbol. DAN- GER identifies the most serious hazards which will result in severe personal injury or death. WARNING signifies a hazard that could result in personal injury or death. CAUTION is used to identify unsafe practices which would result in minor personal injury or product and property damage. NOTE is used to highlight sugges- tions that will result in enhanced installation, reliability, or operation.

ama	CANADIAN GAS ASSOCIATION
®
	A P P R O V E D
	R

A92058

Fig. 1ÐModel 58DFA-

Downflow

A92057

Fig. 2ÐModel 58GFA Upflow

Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations.

Book	1	4	PC 101	Catalog No. 565-801	Printed in U.S.A.	Form 58D,G-3SM	Pg 1	11-93	Replaces: 58D,G-2SM
Tab	6a	8a