Vent Drain
& Clamps Plastic Caps
Yellow or black
Alternate Orientation
Single Pressure Switch Detail
FLOW AIR |
Trap Connection
“Clamp ears” Pointed OUT
Preassemble & insert into furnace
Dual Pressure Switch
EXHAUST | ON | OFF |
FLOWAIR
Field |
| Drain Tube |
Coupling & Clamps | Black Rubber | |
Supplied Tee | (Optional) | 1/2″ (12.7mm) ID |
|
| & Clamps |
Tee Trap White PVC | Cap and Clamp |
|
(loose parts bag) | Open End |
|
Relief Tube Black Rubber
3/16″ (4.8mm) ID
Flexible tubing connector 3/16″ (4.8mm) OD (Loose
Parts Bag)
Relief Tube Extension
Black Rubber 3/16″ (4.8mm) ID
Cut to Fit (Loose Parts Bag)
Drain Tube Corrugated
5/8″ (15.9mm) ID & Clamps
Remove KO before mounting Trap
Cut at straight section
Leave room for clamp | Cut Here |
58HDX
Representative drawing only, some models may vary in appearance.
A07709
Fig. 11 - Horizontal Left Through Top
11