Carrier 58HDX instruction manual 2″ 50.8mm PVC

Plastic Cap

Yellow or black

2″ (50.8mm) PVC	INLET	On Some Models
Coupling		ONLY

Coupling & Clamps (Optional)

Vent Drain

& Clamps

Either: The PVC	EXHAUST
Drain Tee or a field			VENT
supplied 2″
		IN	ON
(50.8mm) PVC Tee
			OFF
Dual Pressure Switch Detail
AIR FLOW
Tee Trap White PVC
(loose parts bag)

Drain Tube

Black Rubber

1/2″ (12.7mm) ID

& Clamps Drain Tube

Corrugated

Single Pressure Switch

Relief Tube

Black Rubber 3/16″

(4.8mm) ID

58HDX

Drain Connector Black PVC 3/4″ (19.1mm) PVC X 1/2″

(12.7mm) CPVC (Loose parts bag)

Casing Grommet Black Rubber

5/8″ (15.9mm) ID (Loose parts bag)

5/8″ (15.9mm) ID

& Clamps

Drain Line Vent Tee 3/4″ (18.1mm) PVC or 1/2″

(12.7mm) CPVC (Field supplied)

SIDE VIEW

Rotate downward 5° to 10°

NOTE: Built--in channel will be angled 5° to 10° also.

25--24--67a

Representative drawing only, some models may vary in appearance.

A07707

Fig. 7 - Upflow Installations Vent Through Left Side

7