Carrier ERVCCSHB1100 installation instructions Table Of Contents, Safety Considerations

ERVCCSVB1100, ERVCCSHB1100

HRVCCSVB1100, HRVCCSHB1100

Energy / Heat Recovery Ventilator

Installation Instructions

NOTE: Read the entire instruction manual before starting the installation.

TABLE OF CONTENTS

PAGE SAFETY CONSIDERATIONS . . . . . . . . . . . . . . . . . . . . . . . . . 1 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 INSTALLATION CONSIDERATIONS . . . . . . . . . . . . . . . . . . . 2 COMPONENT DESCRIPTION . . . . . . . . . . . . . . . . . . . . . . . . 2 UNIT INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 WALL CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

OPERATING THE ERV/HRV WITH

THE INFINITY CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 ELECTRICAL CONNECTIONS . . . . . . . . . . . . . . . . . . . . . . . . 6 ACCESSORIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 BALANCING ERV/HRV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 VENTILATION EVALUATION . . . . . . . . . . . . . . . . . . . . . . . . 8 CONTROL BOARD OPERATION . . . . . . . . . . . . . . . . . . . . . . 8 CARE AND MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . 8 TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

1.Fresh air to building port

2.Exhaust air from building port

3.Fresh air from outside port

4.Exhaust air to outside port

A08103

Fig. 1 - ERV/HRV Unit (Top Port)

A05330

Fig. 2 - ERV/HRV Unit (Side Port)

SAFETY CONSIDERATIONS

Improper installation, adjustment, alteration, service, maintenance, or use can cause explosion, fire, electrical shock, or other conditions which may cause death, personal injury or property damage. Consult a qualified installer, service agency, or your distributor or branch for information or assistance. The qualified installer or agency must use factory-authorized kits or accessories when modifying this product. Refer to the individual instructions packaged with kits or accessories when installing.

Follow all safety codes. Wear safety glasses, protective clothing and work gloves. Have a fire extinguisher available. Read these instructions thoroughly and follow all warnings or cautions included in literature and attached to the unit. Consult local building codes and the current editions of the National Electrical Code (NEC) NFPA 70.

In Canada, refer to the current editions of the Canadian Electrical Code CSA C22.1.

Recognize safety information. This is the safety-alert symbol . When you see this symbol on the unit and in instruction manuals, be alert to the potential for personal injury.

Understand the signal words DANGER, WARNING, and CAUTION. These words are used with the safety-alert symbol. DANGER identifies the most serious hazards which will result in severe personal injury or death. WARNING signifies hazards which could result in personal injury or death. CAUTION is used to identify unsafe practices which may result in minor personal injury or product and property damage. NOTE is used to highlight suggestions which will result in enhanced installation, reliability, or operation.