Page 6 of 8 |
OPERATION
POWER ON/OFF
The unit is turned on/off automatically (instant on) with the siren or auxiliary input controls.
YELP - STANDBY - WAIL SELECTOR SWITCH
A
Yelp - A rapidly changing tone used in congested areas. Wail - A slower changing tone used on highways. Standby - A silent mode that may be overridden anytime.
Y E L P
STANDBY
W
A
I
L
MANUAL/PHASER - HORN SWITCH |
|
|
|
|
|
This momentary rocker switch provides Manual, Phaser | M P |
|
|
| H |
toggle, or Horn tones. |
|
|
| ||
Manual - With selector switch in Standby, siren tone rises | A H |
|
|
| |
while pressed and falls when released until silenced. | N A |
|
|
| O |
May be optionally replaced with Phaser. | U S |
|
|
| R |
See OPTION SWITCHES section. | A E |
|
|
| N |
Horn - Overrides all other siren tones when pressed. | L R |
|
|
|
|
|
|
|
| ||
Provides a simulated |
|
|
|
|
|
supplement the normal vehicle horn. Used at intersections or in low noise areas. Horn tone may be disabled.
See OPTION SWITCHES section.
Phaser - With selector switch in Wail or Yelp, this tone override is toggled on and off by repeat- edly pressing switch. A very rapid changing tone used at intersections and very highly congested areas. May be optionally replaced with
AUXILIARY INPUT FUNCTIONS
The switch or horn ring attached is intended to be momentary.
When the selector switch is in Wail or Yelp, activating auxiliary will produce the Horn tone.
With selector switch in Standby, activating auxiliary will normally produce Horn tone. Different tones are available. See OPTION SWITCHES section.
Horn Ring Cycler 2 (HRC2) - this feature may also be added by turning on the HRC2 option. HRC2 is only available while the unit is in Standby. Tapping the attached horn ring or other switch, will bring the unit out of standby into Wail tone. Repeatedly tapping the horn ring will cycle through Wail, Yelp, and Phaser tones. Tapping the horn ring twice quickly will stop the siren tones and return the unit to standby. Pressing and holding the horn ring will produce Horn tone until released. Then the siren will return to its previous siren tone or standby.
Selector | Manual/Phaser | Horn | Auxiliary Input | |
Switch | ||||
Switch | Switch | (Horn Ring) | ||
(Mode) | ||||
|
|
| ||
Standby | Manual (Default) or Phaser | Horn | Horn (Default), Manual, Phaser, or HRC2 | |
Wail or Yelp | Phaser Toggle | Horn | Horn |
05/24/10 | CP5036A |
