Page 4 of 12
INSTALLATION
Proper installation of the unit is essential for years of safe, reliable operation. Please read all instruction before installing the unit. Failure to follow these instructions can cause serious dam- age to the unit or vehicle and may void warranties.
SAFETY PRECAUTIONS
For the safety of the installer, vehicle operator, passengers and the community please observe the following safety precautions. Failure to follow all safety precautions and instructions may result in property damage, injury or death.
Qualifications - The installer must have a firm knowledge of basic electricity, vehicle electrical systems and emergency equipment.
Mounting - Mount the unit for easy access by the vehicle operator. DO NOT mount in air bag deployment area. Assure clearances before drilling in vehicle. To prevent internal damage mounting bolts must not enter case more than 1/4".
Wiring - Use wiring capable of handling the current required. Make sure all connections are tight. Route wiring to prevent wear, overheating and interference with air bag deployment. Install and check all wiring before connection to vehicle battery.
Testing - Test all siren functions after installation to assure proper operation. Test vehicle opera- tion to assure no damage to vehicle.
Keep These Instructions - Keep these instructions in the vehicle or other safe place for future reference. Advise the vehicle operator of the location.
UNPACKING
Inspect contents for shipping damage. If found alert carrier immediately. Contact supplier immediately if any components are missing.
Contents of box should include the following items:
Qty | Item |
|
1 | Amplifier Unit with attached Microphone | |
|
| |
1 | Bracket, Microphone Clip with mounting screws (CP3633) | |
1 | Bracket, ‘U’ Dash Mount (CP3571) | |
|
|
|
2 | Bolts, ‘U’ Mounting Bracket | (CP3966) |
1 | Cable Assembly, | |
|
|
|
1 | Instruction Manual (CP5012 | This Manual) |
08/06/08 | CP5012A |
