![SIREN SWITCH](/images/new-backgrounds/25136/2513621x1.webp)
SIREN SWITCH
This momentary
Horn - A simulated
Page 11 of 15
SIREN
The Siren
DIP | DIP | Siren |
with Rotary Selector Switch in Standby | ||
OFF | OFF | (Default) Produces Horn tone while pressed. |
ON | OFF | Manual control of Mechanical tone. |
|
| Also Mechanical tone continues to fall when Rotary |
|
| Selector Switch is changed from Mechanical position. |
OFF | ON | Manual control of Wail tone. |
ON | ON | Activates Horn Ring Cycler 2 (HRC2) function. |
AUXILIARY INPUT
During installation an auxiliary input may be connected to the horn ring or other switching device. It provides the same operation as pressing the Siren
HORN RING CYCLER 2 (HRC2)
During installation, the auxiliary input must be connected and the HRC2 option selected. While | ||||||||
the siren is in standby, tap the horn ring for different tones. |
|
|
|
|
|
|
| |
See OPTION SWITCHES section for further details. |
|
|
|
|
|
|
| |
RADIO VOLUME ADJUST |
| Radio Volume | ||||||
The radio repeat volume level is set using an adjustment on the side |
| |||||||
|
|
|
|
|
|
| ||
|
|
|
|
|
|
| ||
of the amplifier. Set the Selector Switch to the Radio position and |
|
|
|
|
|
|
| |
|
|
|
|
|
|
| ||
turn on the power. With the radio volume itself set to a normal level, |
|
|
|
|
|
|
| |
set the siren radio volume adjust control to the desired level. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
DUAL SWITCH
The Dual switch controls the signal to the two amplifiers. With the switch off, the amplifiers produce a common signal to the speakers. With the switch on, independent siren signals are produced by each amplifier as follows:
O
F O
F DUAL N
Rotary Switch | Operating Mode | Activate Siren | |
| Spkr A | Spkr B | Spkr A and B |
Radio | Radio | No Change | |
Standby | Silent | Horn (Default) or Dual Man Mech or Dual Man Wail or HRC2 | |
Mech | Mech | Mech | Horn (Default) or Dual Manual Mech |
Wail | Wail | Yelp | Horn |
Yelp | Yelp | Mech | Horn |
Phaser | Phaser | Mech | Horn |
07/29/08 |
|
| CP5008A |