Carson SA-441-17 manual Specifications

SA-441-17 Installation and Operating InstructionsPage 3 of 15

			SPECIFICATIONS
Input Voltage	11 - 16 VDC (negative ground)
Input Current	17 AMPS (@14 VDC - dual 100W speakers)
Standby Current		Less than 250 mA
Audio Frequency		200Hz - 10 kHz + 3db
Audio Distortion		Less than 3% (@1 kHz - dual 100W speaker)
Audio Output		80 watts (@14 VDC - dual 100W speaker)
Audio Input		400 ohms + 10%
Output Power		210 WATTS RMS MAX. (15 VDC - dual 100W speakers)
Siren Frequency		700Hz - 1500Hz (Mechanical 700Hz – 1600Hz)
		Two-Tone = 435Hz & 585Hz
Tones / Cycle Rates		Mech	Wail	Yelp	Phaser	Two-Tone
		6 CPM	13 CPM	190 CPM	15 CPS	60 CPM
High Voltage		16 - 18 VDC will cause siren output to cease, resume at normal
Protection

Short Circuit Current 50 AMPS (supply circuit must be capable of supplying this)

Operating	-15° F to +140°F
Temperature	6-position rotary selector switch (Radio, Standby. Mechanical, Wail,
Controls
	Yelp, and Phaser).
	Dual siren control toggle switch.
	Momentary push-button Siren switch.
	Front panel mounted PA volume control, Radio adjust on amplifier
	Auxiliary input for positive or negative connection.
	8-position DIP switch option selector.
Connections	(2) Positive, (2) Negative, (3) Speaker, (2) Radio, Control
(10-Pin Conn)	Control Head: 6-1/4" W x 2-7/8" H x 1" D
Size
	Amplifier: 8” L x 6-3/4” W x 2-1/8” H
Weight	6 LBS.

NOTICE

Due to continuous product improvements, we must reserve the right to change any specifications and information, contained in this manual at any time without notice.

Carson Manufacturing Co., Inc. makes no warranty of any kind with regard to this manual, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.

Carson Manufacturing Co., Inc. shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this manual.

See www.carsonsirens.com for latest information.

07/29/08 CP5008A