Cary Audio Design 7.125 owner manual Unpacking, Product Registration, Installation Considerations

INTRODUCTION

PRODUCT REGISTRATION

If you are the original purchaser of this unit and you purchased it in the United States, you should fill out the enclosed warranty registration card and return it to Cary Audio Design within 15 days of your purchase. Cary Audio Design also suggests that you keep your original packing cartons in case you ever need to ship the unit when moving to a new home. Warranty restrictions apply. Consult the warranty section of this manual for details. Please be certain to keep a copy of the original sales receipt from your Authorized Cary Audio Design dealer to validate the warranty if ever needed.

OUTSIDE THE USA: Your local Authorized Cary Audio Design Distributor will make his own warranty policy for your country. Please check with them for the terms of warranty for your new amplifier.

INSTALLATION CONSIDERATIONS

This section describes the unpacking and installation procedures for your new component.

Unpacking

All Cary Audio Design shipping cartons have been specially designed to protect their contents and special care has been taken to prevent damage under normal shipping conditions. Mishandling should be evident upon inspection of the shipping container. If shipping damage is found after visual inspection, take care not to destroy the evidence. If necessary, document the damage with photographs and contact the transport carrier immediately.

Carefully remove your new component from its packing carton and examine it closely for signs of shipping damage. We strongly recommend saving all original packing cartons to protect your component from damage should you wish to store it or ship it for after-sales service.

To ensure optimal performance, pay particular attention to instructions below and to other precautions that appear throughout this user guide.

DO be careful when moving the amplifier, as it is quite heavy.

DO install the Model 7.125 on a solid, flat, level surface such as a table or shelf. The Model 7.125 can also be installed in a standard 19-inch equipment rack using an optional rack-mount kit available from an authorized Cary Audio Design dealer.

DO NOT install the Model 7.125 on a surface that is unstable or unable to support all four feet.

DO select a dry, well-ventilated location out of direct sunlight.

DO NOT expose the Model 7.125 to high temperatures, humidity, steam, smoke, dampness or excessive dust. Avoid installing the Model 7.125 near radiators and other heat-producing appliances.

DO NOT install the Model 7.125 near unshielded TV or FM antennas, cable TV decoders, or other RF-emitting devices that might cause interference.

DO NOT place the Model 7.125 on a thick rug or carpet, or cover the ventilation holes in the chassis, as this might prevent proper cooling.

7