IMPORTANT SAFETY INSTRUCTIONS

14.LIGHTNING: For added protection for the unit during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line surges.

15.POWER LINES: An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, take extreme care to keep from touching such power lines or circuits as contact with them might be fatal.

16.OVERLOADING: Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.

17.OBJECT AND LIQUID ENTRY: Never push objects of any kind into the unit through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the unit.

18.SERVICING: Do not attempt to service the unit yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

19.REPLACEMENT PARTS: When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards.

20.SAFETY CHECK: Upon completion of any service or repairs to the unit, ask the service technician to perform safety checks to determine that the unit is in proper operating condition.

21.WALL OR CEILING MOUNTING: The unit should be mounted to a wall or ceiling only as recommended by the manufacturer.

22.HEAT: The unit should be situated away from heat sources such as radiators, heat registers, stoves, or other units (including amplifiers) that produce heat.

23.IMPORTANT SAFETY NOTE: Before connecting a new component to your audio or home theater system it is always good practice to make certain that all components are turned off, and preferably unplugged from their AC power source. Many modern electronics products feature automatic turn-on circuits that may be activated during an installation, causing the potential for damage to electronic components and/or speakers. Such damage is not covered by product warranties and Cary Audio specifically disclaims responsibility for any such damage.

Power Cord: The removable power cord that is shipped with the player is specifically designed to be used with this product. Other AC cords may be used, so consult your dealer for advice on AC power cords and high quality wire in your system.

AC Fuse: The fuse is located inside the chassis and is not user serviceable. If power does not come on, contact your authorized service representative.

Wiring: Cables that run inside of walls should have the appropriate markings to indicate compliance with, and listing by the UL, CSA or other standards required by the UL, CSA, NEC or your local building code. Questions about cables inside of walls should be referred to a qualified custom installer, or a licensed electrician or low-voltage contractor.

Do Not Open the Cabinet: There are no user serviceable components inside this product. Opening the cabinet may present a shock hazard, and any modification to the product will void your warranty. If water or any metal object, such as a paper clip, coin, or staple accidentally falls inside the unit, disconnect it from the AC power source immediately and contact Cary Audio for further instructions.

24.RECORDING COPYRIGHT: Recording of copyrighted material for other than personal use is illegal without permission of the copyright holder.

25.NOTE TO CATV SYSTEM INSTALLER: This reminder is provided to call the CATV system installer's attention to article 820-40 of the NEC, ANSI/NFPA 70, which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.

3

Page 3 Page 5
Page 4
Image 4
Cary Audio Design 7.125 owner manual Important Safety Instructions
Page 3 Page 5

7.125 specifications

Cary Audio Design has built a strong reputation in the audiophile community for creating high-performance audio equipment, and their 7.125 model is no exception. This five-channel power amplifier is designed to deliver a rich, dynamic sound experience, making it an ideal choice for both home theater and multi-channel music systems.

One of the standout features of the Cary 7.125 is its robust power output. With 125 watts per channel into 8 ohms, it provides ample power to drive a variety of speaker types, ensuring that even the most demanding audio tracks are delivered with clarity and authority. Its class A/B topology also contributes to its outstanding performance, allowing for detailed audio reproduction across the frequency spectrum.

Technology-wise, the Cary 7.125 employs a sophisticated circuitry design that minimizes distortion and maximizes fidelity. The use of high-quality components, including premium capacitors and resistors, ensures that the signal remains pure, preserving the integrity of the original recording. Additionally, the 7.125 features a dual-mono design, which isolates the left and right channels, further enhancing separation and soundstage.

The amplifier also boasts a sleek, modern aesthetic that will complement any audio system. Its solid aluminum chassis not only provides a sturdy enclosure but also helps to dissipate heat, ensuring stable operation even during extended listening sessions. The front panel features easy-to-read LED indicators and a power switch, making it straightforward to operate.

Another characteristic that sets the Cary 7.125 apart is its flexibility in connectivity. It is equipped with a variety of inputs, including both balanced XLR and unbalanced RCA options, allowing users to integrate it easily into existing setups. This versatility makes it a great fit for both audiophiles and casual listeners who wish to enhance their audio experience.

Lastly, the Cary Audio Design brand is synonymous with build quality and longevity. The 7.125 is no exception, designed to offer years of reliable performance. With its impressive power, innovative technologies, and elegant design, the Cary Audio 7.125 stands out as a premier choice for those seeking exceptional sound quality in their audio systems.
Top Page Image Contents