IMPORTANT SAFETY INSTRUCTIONS

WARNING: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of un-insulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

CAUTION: To reduce the risk of electric shock, do not remove the cover. There are no user serviceable parts inside. Please refer to qualified personnel for service.

ALERT: The exclamation point within an equilateral triangle is intended to alert the user of the presence of important operating and maintenance (servicing) instructions in the literature accompanying the component.

1.READ ALL INSTRUCTIONS: All the safety and operating instructions of your Cary Audio equipment should be read before power is applied to the equipment.

2.RETAIN OWNER'S MANUAL: These safety and operating instructions should be retained for future reference.

3.HEED WARNING: All warnings on the unit and in the operating instructions should be adhered to.

4.FOLLOW INSTRUCTIONS: All operating and use instructions should be followed.

5.CLEANING: Unplug the unit from the wall outlet before cleaning. The unit should be cleaned only as recommended by the manufacturer.

6.ATTACHMENTS: Do not use attachments not recommended by the unit manufacturer as they may cause hazards.

7.WATER AND MOISTURE: Do not use the unit near water - for example, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a wet basement; or near a swimming pool.

8.ACCESSORIES: Do not place the unit on an unstable cart, stand, tripod, bracket, or table. The unit may fall, causing serious injury to a child, an adult, or damage to the unit. Mounting of the unit should follow the manufacturer's instructions and should use a mounting accessory recommended by the manufacturer.

9.VENTILATION: Slots and openings in the cabinet are provided for ventilation to ensure reliable operation of the unit and to protect it from overheating. These openings must not be blocked or covered. The top or bottom panel openings should never be blocked by placing the unit on a bed, sofa, rug, or other similar surface. The unit should not be installed in a built-in location such as a bookcase or rack unless proper ventilation is provided. There should be free space of at least 6 inches (16cm) above the unit and an opening behind the unit.

10.GROUNDING OR POLARIZATION: The unit may be equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you cannot insert the plug fully into the outlet, try reversing the plug. If the plug should fail to fit, contact a licensed electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.

11.POWER SOURCES: The unit should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home, consult your unit dealer or local power company.

12.POWER CORD PROTECTION: Power supply cords should be routed so that they are unlikely to be walked on or pinched by items placed on or against them. Pay close attention to cords where they enter a plug, or a convenience receptacle, and the point where they exit from the unit.

13.OUTDOOR ANTENNA GROUNDING: If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is grounded so as to provide protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, NSI/NFPA 70, provides information regarding proper grounding of the mast and supporting structure, grounding of the lead-in wire to an Antenna-discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.

2

Page 2 Page 4
Page 3
Image 3
Cary Audio Design CAA 1 owner manual Important Safety Instructions
Page 2 Page 4

CAA 1 specifications

Cary Audio Design has long been recognized in the audiophile community for its commitment to high-quality sound reproduction and innovative technologies. One of its standout products, the Cary Audio Design CAA 1, exemplifies these values with a blend of modern advancements and classic design principles.

The CAA 1 Integrated Amplifier is a versatile piece of audio equipment, designed to cater to both discerning audiophiles and casual listeners. With a robust power output, the CAA 1 can effortlessly drive a wide range of speakers while delivering exceptional sound clarity and depth. The design of the amplifier is functional yet elegant, featuring a sleek aluminum chassis that not only lends it a premium look but also helps to minimize unwanted vibrations and interference.

One of the key features of the CAA 1 is its hybrid design, which combines the warmth of vacuum tube technology with the precision of solid-state circuits. This unique approach allows the amplifier to produce rich, warm tones reminiscent of classic tube amplifiers while retaining the dynamics and control associated with solid-state designs. Users can enjoy a refined audio experience that enhances both vocal clarity and instrumental detail.

The CAA 1 also showcases a comprehensive array of connectivity options, including analog and digital inputs, allowing it to integrate seamlessly with various audio sources. This flexibility ensures that it can accommodate modern digital sources such as streaming devices, as well as traditional analog components like turntables and CD players.

Another notable aspect of the CAA 1 is its advanced power supply design, which contributes to its impressive performance. The amplifier features a toroidal transformer that provides clean, stable power to the audio circuits, minimizing noise and distortion. This results in a more dynamic and lifelike soundstage, allowing listeners to hear music as it was intended by the artists.

In terms of user control, the CAA 1 incorporates an intuitive interface with a remote control option, making it convenient to adjust settings and volume from a distance. The amplifier is also equipped with a quality headphone output, offering an additional layer of versatility for personal listening.

In summary, the Cary Audio Design CAA 1 Integrated Amplifier is a testament to the brand's dedication to quality and performance. With its hybrid technology, robust build, and versatile connectivity, it impresses both audiophiles and casual listeners alike, providing a listening experience that is rich, immersive, and true to the original sound.
Top Page Image Contents