Cary Audio Design CAA 1 Balanced Inputs, Single-Endedinputs, Input Switch, Controls And Displays

CONTROLS AND DISPLAYS

4.BALANCED INPUTS

•Accepts right-channel and left-channel balanced signals from the associated preamplifier with balanced outputs.

•The pin assignments of these XLR-type female input are:

Pin 1: Signal ground

Pin 2: Signal + (non-inverting)

Pin 3: Signal - (inverting)

Connector ground lug: chassis ground

Refer to your preamplifier's operating manual to verify that the pin assignments of its input connectors correspond to this unit. If not, wire the cable so that the appropriate output pin connects to the equivalent input pin.

5.SINGLE-ENDED INPUTS

•Accepts right-channel and left-channel (RCA) inputs from the preamplifier. These signals are converted to balanced signals upon entering the chassis and processed as balanced signals thereafter. One pair RCA connector is available.

6.INPUT SWITCH

•Use this switch to choose between the BALANCED inputs or the SINGLE-ENDED inputs.

10