Edirol Windows Me/98 users, Open the SetupInf dialog box, Set the UA-20’s, Troubleshooting

Getting Connected and Installing Drivers (Windows)

■Windows Me/98 users

1

With the UA-20 disconnected, start up Windows.

Disconnect all USB cables other than those for a USB keyboard or USB mouse.

2

Exit all currently running software (applications).

Also, close any open windows. If you are using a virus checker or similar software, be sure to exit this as well.

3

Prepare the CD-ROM.

Insert the CD-ROM into the CD-ROM drive of your computer.

4

Click the Windows Start button. From the menu that appears, select Run....

Open the Run... dialog box.

5

In the dialog box that appears, input the following into the “Open” field, and click

[OK].

D:\DRIVER\USB_ME98\SETUPINF.EXE

*The drive name “D:” may be different depending on your system. Type the name of your CD-ROM drive.

6

Open the SetupInf dialog box.

You are now ready to install the driver.

7

Set the UA-20’s

ADVANCE (mode select) switch to the ON position.

If the UA-20 is already connected to your computer and a message of “Add New Hardware Wizard” is displayed, go to the CD-ROM folder named DRIVER\USB_ME98, open the file Readme_e.htm, and read

the “Troubleshooting”

section entitled “You

attempted to install using the above procedure, but were not able to.”.

In this manual, the location of folders and files is given in terms of the file path, using \ as the delimiter. For example,

USB_ME98\SETUPINF.EXE

indicates that the SETUPINF.EXE file is located in the USB_ME98 folder.

English

Deutsch

Français

Italiano

Español

29