Edirol UA-20 Insert Disk, Dialog box will appear, If File signature verification is set to Warn

Getting Connected and Installing Drivers (Windows)

13

Use the USB cable to connect the UA-20 to your computer.

If the “File signature verification” setting was not set to “Ignore”, a “Digital Signature Not Found” dialog

box will appear.

If “File signature verification” is set to “Warn,”

1.Click [Yes].

2.Continue the installation.

If “File signature verification” is set to “Block”

1.Click [OK].

2.When the “Found New

Hardware Wizard” appears, click [Finish].

3.Perform the installation as described in the

“Troubleshooting” section on Device Manager shows “?”, “!”, or “USB Composite Device”

(p. 68).

14

The Insert Disk

dialog box will appear.

Click [OK].

This unit is equipped with a protection circuit. A brief interval (a few seconds) after connecting a USB connector is required before the unit will operate normally.

If the Insert Disk dialog box does not appear, please read

The “Insert Disk” dialog box does not appear (p. 68).

26