Edirol UA-20 owner manual Click Start Test, Sound dialog box, click the Input tab

Getting Connected and Installing Drivers (Macintosh)

3

With the volume turned down on the UA-20and on your peripheral audio equipment,

click [Start Test].

Test signals will be output from the UA-20; left first, then right, as indicated in the screen.

4

In the Sound dialog box, click the Input tab.

In Choose a source for sound input (Device), select USB audio.

*Do not check “Play sound through output device”.

5

When you are finished making settings, close the Sound dialog box.

From the File menu, select Quit.

The output volume of the UA- 20 cannot be adjusted with the Mac OS sound dialog box.

Make volume adjustments through other means, such as on the speaker system you are using.

If USB audio is not displayed, close the “Sound” dialog box, and disconnect the UA-20’s USB cable from the Macintosh. Perform the driver installation (p. 53) once again.

English

Deutsch

Français

Italiano

Español

55