Edirol UA-20 owner manual Insert Disk dialog, Files Needed, Copy files from

Getting Connected and Installing Drivers (Windows)

If the “What action do you want Windows to take?” setting was not set to “Ignore”, a “Hardware Installation” dialog box will appear.

If “What action do you want Windows to take?” is set to “Warn,”

1.Click [Continue Anyway].

2.Continue the installation.

If “What action do you want Windows to take?” is set to “Block”

1.Click [OK].

2.When the “Found New Hardware Wizard” appears, click [Finish].

3.Perform the installation as described in the “Troubleshooting” section

on Device Manager shows “?”, “!”, or “USB Composite Device” (p. 68).

16

The Insert Disk dialog
box will appear.	The Insert Disk dialog may
Click [OK].	not appear. In that case,
	proceed to step 17.

17

The Files Needed
dialog box will appear.
Input the following into
the “Copy files from”
field, and click [OK].	If you are using the MME
	driver, input MME instead of
D:\Driver\USB_XP2K\WDM	WDM.

*The drive name “D:” may be different for your system. Specify the drive name of your CD-ROM drive.

English

Deutsch

Français

Italiano

Español

21