Edirol UA-20 Windows 2000 users, Signature, If you changed File signature verification p

Getting Connected and Installing Drivers (Windows)

Windows 2000 users

1

With the UA-20 disconnected, start up Windows.

Disconnect all USB cables except for a USB keyboard and USB mouse (if used).

2

Log on to Windows as a user with administrative privileges (such as Administrator).

3

Open the System Properties dialog box.

Click the Windows Start button, and from the menu that appears, select Settings Control Panel. In Control Panel, double-click the System icon.

4

Click the Hardware tab, and then click [Driver

Signature].

Open the Driver Signing

Options dialog box.

If the UA-20 is already connected to your computer and a message of “Add New

Hardware Wizard” is

displayed, go to the included CD-ROMfolder named

DRIVER\USB_XP2K\WDM or DRIVER\USB_XP2K\MME,

open the file Readme_e.htm, and read the

“Troubleshooting” section entitled “You attempted to install using the above procedure, but were not able to.”.

5

Make sure that “File signature verification” is set to “Ignore”.

If it is set to “Ignore”, simply click [OK].

If it is not set to “Ignore”, make a note of the current setting (“Warn” or “Block”). Then change the setting to “Ignore” and click [OK].

After installing the driver, restore the original setting.

(➝ If you changed “File signature verification” (p. 28))

If you changed “File

signature verification” in

step 5, you must restore the previous setting after you have installed the driver. (–> If you

changed “File signature verification” (p. 28))

24