Edirol owner manual Installing the UA-20 driver FreeMIDI

Getting Connected and Installing Drivers (Macintosh)

■Installing the UA-20 driver (FreeMIDI)

Use the following procedure to install the UA-20 driver. The included UA-20 FreeMIDI driver is an add-on module for using the UA-20 with FreeMIDI. In order to use it, FreeMIDI

must be installed on the hard disk from which you started up.

*Disconnect the UA-20 from the Macintosh before beginning the installation.

1

Exit all currently running software (applications).

If you are using a virus checker or similar software, be sure to exit this as well.

2

Prepare the CD-ROM.

Insert the CD-ROM into the CD-ROM drive.

3

Double-click the UA-20 FM Driver - E Installer icon (found in the Driver E - FreeMIDI folder of the CD-ROM) to start up the installer.

4

Verify the Install Location, and click [Install].

5

If a message like the following is displayed, click [Continue].

The other currently

running applications will exit, and installation will continue.

6

A dialog box will indicate Installation completed. Click [Restart] to restart your Macintosh.

48