Edirol UA-20 owner manual On position, Wait for approximately five seconds

Getting Connected and Installing Drivers (Macintosh)

Installing the OS-standard driver

1
With the UA-20 disconnected, start up Mac OS.
2
Exit all currently running software (applications).
If you are using a virus checker or similar software, be sure to
exit it as well.
3
After starting up Mac OS, select
Apple System Profiler from the
Apple menu.
The “Apple System Profiler” dialog box will appear.
4
Click the Devices and Volumes tab.
5
Set the UA-20’sADVANCE (mode select) switch to	This unit is equipped with a
the ON position.	protection circuit. A brief
6	interval (a few seconds) after
	connecting a USB connector is
Use the USB cable to connect the UA-20 to your	required before the unit will
	operate normally.
computer.
7
Wait for approximately five seconds.

The UA-20 will use the driver included with Mac OS.

While you are waiting, the screen display will not change, but the UA-20 is being detected. Do not touch the mouse or keyboard.

English

Deutsch

Français

Italiano

Español

53